Gio'Style BRIO 30 L 12/230V CLASS E Manual Del Usuario página 11

Warning!
After a long period of operation in COLD mode,
it is possible that water will be deposited inside
the refrigerator. This is normal and is caused by
moisture in the air which condenses when it cools. The
fridge is not faulty. If necessary, remove excess moisture
with a dry cloth.
NOTE!
Operation of the appliance is by Peltier system
free of CFC and coolants.
5. OPERATION
Once connected to a power source, the fridge functions
immediately. In COLD mode, the temperature inside the
appliance can drop between 13 and 20 ºC below the
external one. In HOT mode, the temperature inside the
appliance can rise between 10º C and 30 ºC above the
external one.
• To switch off the fridge, simply disconnect the power
cable.
Note: for models with a dual power supply (energy
saving), with a settings dial:
if connected to the mains
230 V AC power supply, 2 operating modes can be se-
lected:
1. ECO FUNCTION:
the appliance complies with the energy-saving directive,
maintaining the assigned energy rating (see paragraph
1).
7. TROUBLESHOOTING
PROBLEM
The fridge does not work
and the fan does not rotate
(if connected to the acces-
sory socket).
If connected to the 230 V
mains supply, the fridge
does not work and the fan
does not rotate (only for
models with built-in power
supply)
The fan turns but the refri-
gerator does not cool and/
or heat.
During operation, water
builds up inside the fridge.
8. WARRANTY
• The fridge has a 24-month warranty, starting on the
date of purchase, against manufacturing defects which
are not caused by inappropriate use, tampering or dama-
ge caused by the user/third parties.
• If the product is defective, please contact Gio'Style
customer service online at www.giostyle.com, or contact
POSSIBLE CAUSE
There is no power supply to the vehicle's
accessory socket.
The car plug fuse has blown.
The vehicle's fuse has blown.
The cooling fan is faulty.
The socket does not work.
The plug is not inserted correctly.
The cooling fan is faulty.
The built-in power supply is faulty.
The AC power cable is faulty.
The air vents are partially or completely
obstructed.
The thermoelectric module (Peltier) is
faulty.
The fridge has been operating for some
time and has generated condensation.
2. MAX FUNCTION:
the appliance does NOT comply with the energy-saving
directive and operates continuously at its maximum
power. To select the desired mode, rotate the dial.
Nota per i modelli con funzione HOT/COLD:
With selector on position COLD the internal part of ap-
pliance will be cooled.
With selector on position HOT the internal part of applian-
ce will be warmed.
HOT
COLD
HOT
COLD
12V
6. CLEANING AND MAINTENANCE
OFF MAX
Warning!
Before cleaning the fridge, disconnect the power
cable from the mains socket or the vehicle's
accessory socket.
Warning!
Never immerse the fridge under running water.
• Do not use corrosive or abrasive detergents for
cleaning, nor objects which could damage the
product (e.g. blades, palette knives).
• Clean the inside and outside of the fridge with a damp
cloth from time to time.
• Protect the fridge lid to stop liquids, sand and dust from
getting in.
POTENTIAL SOLUTION
In many vehicles, it is necessary to turn the ignition to the "accessory"
position for the accessory socket to work.
Replace the fuse (image 3) with one of the same type. Read the tech-
nical details on the fuse.
Replace the fuse in accordance with the vehicle's user manual.
Contact customer services (see the Warranty section).
Check that the socket works.
Check that the plug is correctly inserted into the socket by removing it
and reinserting it.
Contact customer services (see the Warranty section).
Contact customer services (see the Warranty section).
Replace the cable with a new original one.
Check both the internal and external air vents. Move the fridge to a
place where it can be better ventilated.
Contact customer services (see the Warranty section).
Disconnect the fridge and wipe off the excess water with a cloth. Wait a
few hours before turning the fridge back on.
your nearest distributor (see link on reverse of manual).
• For the warranty conditions to be valid, you must have
the following documentation:
- a copy of the invoice or till receipt showing the date
of purchase of the product.
- a reason for the claim or a description of the fault.
OFF MAX 12V DC
11