Roadstar CDR-365U Manual De Instrucciones página 4

1 English
LOCATION OF CONTROLS
1. LCD DISPLAY
2. POWER
3. EQ/MODE
4. PLAY-PAUSE: Press to play. When it plays, press to stop playback temporarily
and press again to resume playback.
5. STOP/REPEAT
6. BACK / TUNE -: Press to go to the previous track, press & hold to go back fast.
7. NEXT / TUNE +: press to go to the next track, press & hold to go fast forward.
8. VOLUME -
9. VOLUME +
10. ANTENNA
11. CD DOOR
12. BATTERY COMPARTMENT
13. USB SOCKET
14. AUX-IN SOCKET
15. HEADPHONES OUT
16. AC PLUG
PRECAUTION
• INSTRUCTIONS - All the safety and operating instructions should be read before
the radio is operated. The manual should be retained for future reference.
• HEED WARNINGS - All warnings on the appliance and in the operating instruc-
tions should be adhered to.
•
WATER AND MOISTURE - The appliance should not be used near liquids or in
rooms with a high level of humidity.
•
VENTILATION - The appliance should be situated so that its location or position
does not interfere with its proper ventilation.
•
HEAT - The appliance should be situated away from heat sources such as radia-
tors, stoves or other appliances that produce heat.
•
POWER SOURCE - The radio should be connected to power supply only of the
type described in the operating instructions or as marked on the appliance.
• POWER CORD PROTECTION -
are not likely to be walked on or pinched by items placed upon/against them.
• OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
•
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
• The power supply cord or plug has been damaged;
•
Objects have fallen into or liquids has been spilled into the radio;
The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.
• SERVICING - The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred t quali-
fied service personnel
Power supply cords should be routed so that they