Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL/POWER ON
Windshield
When you mount the R4BLK on the windshield, mount it in the middle of the
windshield between the driver and passenger. Be sure there are no obstructions and
that there is a clear view through the windshield.
1.
Attach the rubber suction cup to the bracket and push the cup firmly onto the
windshield.
2.
Slide the unit onto the bracket until it clicks into place.
3.
Plug the power cord RJ11 connector into the R4BLK and plug the cigarette
lighter adapter into the vehicle's cigarette lighter.
4.
When the vehicle turns on, the R4BLK automatically turns on and runs through
a self test cycle.
Release the R4BLK from the bracket by pressing the Eject key on top of the
Dashboard
The same types of mounting requirements for the windshield apply for mounting the
unit on the dashboard.
1.
Attach the unit to the dashboard using the hook and loop fastener tape.
Be careful not to cover any air vent holes with the hook and fastener tape.
2.
Plug the power cord RJ11 connector into the R4BLK and plug the cigarette
lighter adapter into the vehicle's cigarette lighter.
3.
When the vehicle turns on, the R4BLK automatically turns on and runs through
a self test cycle.
Pull the unit from the dashboard, separating the hook and loop tape.
MENU SYSTEM
Menus let you set up the system to your own requirements. You can turn different
bands on and off and set specific items such as speed or auto mute.
Press MENU to access the Menu system. The screen displays the selection's current
status. For example, if you press MENU and the screen displays Voice: ON, you have
the option of turning Voice to OFF.
Use the following keys to navigate the menus:
• MENU: Change a menu item setting (press and hold to exit the Menu system).
• VOL + : Go to the next Menu item.
detector.
- 13 -
Publicidad
