Uniden R4BLK Manual Del Usuario página 21

MENU ITEM FUNCTION
Display Select what will display on the
OLED, either scanning, mode, or
time (see page 30).
Scan Icon Turn the scan icon (small red
heart) on or off.
Left Display Lets you select various attributes
to display on the left side of the
(If GPS on)
OLED.
Alert Display Select the desired alert display
Mode style.
(If GPS on)
Speed Unit Select the speed measurement
type.
(If GPS on)
X Band Tone Set a tone to indicate X Band.
K Band Tone Set a tone to indicate K Band.
K Bogey Set a tone to indicate when
the detector is responding to a
different K band signal.
MRCD/T Tone Set a tone to indicate when
MRCD/T signals are detected.
(if MRCD/T
is on)
Gatso Tone Set a tone to indicate Gatso
(if Gatso RT3/4
on)
Ka Band Tone Set a tone to indicate Ka Band.
SETTINGS
Scan
Mode (Default)
Time (if GPS on)
On
Off (Default)
Speed (Default)
Speed + Compass
Compass
Voltage
Altitude
Alert Display Style #1
(Default)
12.8
V
Alert Display Numb#2
12.8
V
mph (default)
km/h
1 ~ 12 tones (Default = 1)
1 ~ 12 tones (Default = 2)
1 ~ 5 tones (Default = 1)
1 ~ 12 tones
(Default = 6)
1 ~ 12 tones (Default = 9)
RT3/4.
1 ~ 12 tones
(Default = 3)
- 21 -
Ka
33.800
Ka
33.800
GHz
Lorem ipsum