Descargar Imprimir esta página

Uniden R4BLK Manual Del Usuario página 31

Publicidad

Idiomas disponibles

Idiomas disponibles

Example 1:
12.8
Example 2:
12.8
GATSO RT3/RT4 FREQUENCY RANGES
There are two types of Gatso traffic enforcement systems - RT3 and RT4. RT3's
frequency range is 50MHz and RT4's is 100MHz. The following example shows the
alert for Gatso RT4 in display format #2.
MODES (HIGHWAY, CITY, AUTO, AND ADVANCED)
Uniden's R4BLK radar detector operates in two different frequency (X, K, and Ka
band) sensitivity modes - Highway and City. Highway mode is the most sensitive,
with maximum detection ranges while on the highway or open road. City is on the
lower end of the detection scale for city driving. City mode reduce sensitivity so that
false signals (such as from automatic door openers) are filtered out.
Under factory default conditions (X band = off on all modes, K and Ka bands = on),
the band sensitivities are:
• Highway: X, K, and Ka bands full sensitivity.
• City: X and K bands sensitivity reduced; Ka band full sensitivity.
• Auto: Auto mode will switch the R4BLK between Highway and City depending
on the Auto City Speed menu setting (see page 15). Sensitivity is the same as
Highway and City settings.
• Advanced: Adjust the sensitivity level for each band.
Press MENU. The current level and mode display.
1.
2.
Press MENU to scroll through the modes and select Advanced mode.
3.
Press VOL+ to scroll through the Bands and then press MENU to adjust the
desired band in 10% increments.
Ka
V
Ka
33.650
V
RT4
39
mph
- 31 -
33.800
Gatso

Publicidad

loading