Uniden R4BLK Manual Del Usuario página 25

MENU ITEM FUNCTION
DB Ver Displays the latest database
version.
(If GPS on)
Exit Closes the Menu system.
BASIC OPERATIONS
HOW DO I ...?
Turn on the R4BLK
Adjust the volume
Mute alarm audio during
the alert
Change the screen's
brightness
Turn bands on and off
Change system modes
(Highway to City or
Auto), or set attenuation
levels in Advanced mode
and back
TRY THIS...
Be sure the unit is connected to power and then press
POWER. The unit turns on and runs through an initial
self-check if Self Test is turned on. It displays the
different bands and their settings.
The R4BLK turns on automatically when you start the
vehicle.
Press VOL + to increase volume. The unit beeps and
displays a number increase.
Press VOL – to decrease volume. The unit beeps and
displays a number decrease.
Press MUTE/DIM during an audio alarm to mute it.
(This is especially useful in situations where the alert
may be prolonged, such as at red lights.) You can also
press the MUTE button on the power cord.
Press and hold MUTE/DIM. The R4BLK announces the
brightness level (Bright, Dim, Dimmer, Dark, or Off) as
it changes to that level. Press the key again to cycle
between the brightness levels.
Press MENU and then press VOL+ to cycle through the
menu options until the band you want to turn on or
off displays. Press MENU again to change that band's
status.
Press MENU then Vol+. The current system mode
displays. Press MENU to cycle through Highway, City,
Auto, and Advanced. After you select Highway, City,
or Auto, press and hold MENU to exit. If you select
Advanced, press VOL+ to select either the X, K, or Ka
band to adjust. Press MENU to adjust sensitivity levels
in 10% increments. Press Vol+ again to adjust the
other modes.
- 25 -
SETTINGS
NA
NA