Publicidad
Idiomas disponibles
Idiomas disponibles
HOW DO I ...?
Set a user mark
Delete a user mark
Delete ALL user marks
Update the firmware and
database
Adjust the time
Set up the R4BLK screen
to get brighter and
dimmer at specific times
FEATURE DETAILS
ALARM PRIORITIES
• GPS Connected / GPS Error / Speed Camera / Red Light Camera / User Mark
Alarm/POI Limit Speed Alarm.
• Laser signal (Alert display style #1)
TRY THIS...
Press MARK to create a user mark when you are at a
location where there is normally some type of radar.
The R4BLK announces "User mark logged." The R4BLK
will announce when you approach user marks.
R4BLK shares up to 2,000 points between Mute
Memory and User Marks.
Press MARK again at that location to delete the user
mark.
R4BLK shares up to 2,000 points between Mute
Memory and User Marks.
The R4BLK does NOT ask for confirmation before
deleting single user marks.
Press and hold MARK to delete all user marks. Delete
All User? displays and is announced. Press MARK
again. Delete confirmation message displays and is
announced.
Refer to www.unidensupport.com for details.
Go to Menu/Expert and select any menu mode. Press
VOL+ to scroll to GPS and be sure it is turned on.
Continue scrolling to GMT. Select the GMT for your
time zone (see page 23). Press and hold Menu to
exit. The time should automatically adjust.
Set the Dim level to AUTO using the MUTE/DIM button
on the R4BLK unit or the MUTE button on the power
plug.
Next, set the times that the OLED will get brighter or
dimmer through the Auto Dim menu in the Expert
level. (See page 28.)
- 26 -
Publicidad
