Ego Power+ MINI BIKE MB1000 Manual Del Usuario página 29

SPEED LIMITER
The speed limiter is designed to limit the
riding speed of the mini bike to reduce
the risk and the severity of injuries for
inexperienced riders.
When the speed limiter switch is on, the
SPORT mode is not available. If a rider
attempts to activate the SPORT mode, the
box around the "SPORT" icon on the LCD
screen will flash three times and then
turn off (Fig. 6a).
NOTICE:
The speed limiter is set to ON by default at the factory.
To turn the speed limiter ON or
OFF:
a. Insert the key into the battery &
storage lock and turn the key
clockwise to unlock the battery
compartment.
b. Hold the handlebars straight and
open the battery compartment cover
(Fig. 6b).
c. Loosen the two M6 hexagon socket
seat lock bolts and washers with
the 5 mm hex key (included in
the toolkit). Then push the seat
assembly towards the back of
the mini bike to remove the seat
assembly.
d. Turn the speed limiter switch ON
(I) or OFF (O) (Fig. 6c) and reinstall
the seat assembly by following the
above steps in reverse order.
6a
6b
1
6c
56V MINI BIKE — MB1000/ MB1000-FC
Seat Lock Bolts
2
Washers
3
Speed Limiter Switch
29