Dalbach BO-01 Instrucciones De Uso página 85

EN
18 Error messages
ERROR MESSAGE
AS
F
The oven does not
heat
Oven lighting does not
light up when the oven
is switched on
Fan is constantly in
operation
The "door lock" symbol
flashes
Page | 40
POSSIBLE CAUSE
Temperature sensor does
not work
The oven has a defect.
The oven is set to DEMO
(see settings)
Incorrectly connected
Differing supply voltage
Lamp defective
TROUBLESHOOTING
Contact the relevant After Sales
Service.
Switch off the oven for 30
minutes.
If the problem still occurs:
Disconnect the oven from the
power supply for one minute
and then reconnect it. If the
problem is not solved, contact
After Sales Service.
See settings
Contact After Sales Service.
Check the supply voltage, if
necessary contact After Sales
Service.
Replace lamp (see chapter
Max. 1 hour after oven
operation is normal.
If it takes longer, contact After
Sales Service.
Contact After Sales Service
6).