Samsung NSE6D 83 Serie Manual Del Usuario página 60

Troubleshooting
Displayed
Possible cause
code
The sub PCB sensor is open
when the oven is operating.
C-22
There is a short in the sub PCB
sensor.
The main PCB sensor is open
when the oven is operating.
C-30
There is a short in the main PCB
sensor.
This code occurs if the PCB
C-31 temperature rises abnormally
high.
This code appears if the divider
is inserted or removed while the
oven is operating.
-dC-
60 English
Solution
Press Stop/Clear, and then
restart the oven. If the
problem persists, disconnect
all power to the range for at
least 30 seconds and then
reconnect the power. If this
does not solve the problem,
call for service.
Call for service
Make sure the divider is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
Displayed
Possible cause
code
This error message appears
if the power cord is installed
improperly.
Bad line
This code occurs if the sub PCB
temperature rises abnormanlly
high.
C-A2
Solution
If the power connection is
plugged in improperly, that
code appears on the display.
Reconnect the power
connection properly, and the
message disappears.
Press Stop/Clear.
Check the oven vent and
cooling vent. If the vent is
closed, never block the vent
by anything. After cooling the
oven, restart the oven.
If this does not solve the
problem, call for service.