SAFETY INSTRUCTIONS
SAFETY NOTICES, SAFETY INSTRUCTIONS AND NOTICES
The warning notices, safety instructions and notices are structured according to the following scheme:
Possible consequences and the cause of the hazard. Measure that
must be taken in order to avoid this hazard.
Various warning signs and signal words may be used, depending on the situation.
Indicates a potentially hazardous situation. Fatality or serious injury
may result if the situation is not avoided.
Indicates a potentially hazardous situation. Minor or negligible injury
may result if the situation is not avoided.
Indicates a potentially harmful situation. The product or something in
its immediate vicinity may be damaged if the situation is not avoided.
OPERATING INSTRUCTIONS
These operating instructions will help you to use your bicycle/EPAC (Electrically Power Assisted
Cycle) properly and safely, so that you can get many years of enjoyment out of it. If your bicycle
has not been handed over to you completely assembled and adjusted, please contact your
dealer for any adjustments.
Serious injury and/or equipment damage can be caused by
incomplete assembly. This bicycle may only be used if all of its
components have been assembled in accordance with the
operating instructions. Make sure all screws/nuts have been
tightened with the specified tightening torque and the appropriate
torque wrench.
4
WARNING SIGN AND SIGNAL WORD
WARNING
CAUTION
NOTICE
WARNING
WARNING
TORQUE WRENCH