KSIX Olympo Manual De Usuario página 2

1.4 How to attach and remove the straps
The Olympo smartwatch includes 2 straps (formal and
sport). Here is how both attachment and removal systems
work and how to shorten or elongate the formal strap:
Sport strap
- To remove a strap: Hold the strap and carefully slide the
metal piece out of its hole.
- To attach a strap: Hold the strap and insert the metal piece
on one end. Then, slide the metal piece on the other end and
insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
Formal strap
- To remove a strap: Hold the strap and carefully slide the
metal piece out of its hole.
- To attach a strap: Hold the strap and insert the metal piece
on one end. Then, slide the metal piece on the other end and
insert the end of the strap so that when you let go of the
metal piece it fits into the case hole.
How to shorten or elongate the formal strap
- To shorten the strap:
1. Remove the strap from the watch's case.
2. Rotate the alignment tool counterclockwise to make
space for the strap piece that you want to take out to fit.
3. There are three arrows at each end of the strap. Select the
desired piece and align its hole with the pin of the alignment
tool. Rotate the tool clockwise until its pin is completely
inserted in the hole and the metal pin that was inside the
strap piece comes out.
- To elongate the strap:
1. Repeat the same process but the other way around. Place
the strap piece with the arrow where it was before taking it
out.
2. Then, slide the metal piece inside the hole from which it
came out and in the same direction.
3. To make it slide in completely, use the round end of the
alignment tool as a hammer.
1.5 Charging
The Olympo smartwatch's full charge time is approximately
3 hours, and the battery can last up to 5 days depending on
the usage.
Use the 60 cm USB-A cable with magnetic charging base
that is included in the box to charge the smartwatch.
Connect the USB-A connector to a charger, computer
output or powerbank and place the magnetic base in a way
so that it properly sticks to the back part of the watch body.
1.6 Power on/off
To turn on the smartwatch, long tap the dial button.
To turn off the smartwatch, press the dial button for 2
seconds. 2 options will appear: "SOS" and "Power off". Select
the "Power off" option and slide it to the right. You can also
shut down the watch by accessing the main menu and
tapping on the "Power on/off" button.
1.7 About IP protection rating
The Olympo smartwatch has an IP67 protection rating. This
means that it can withstand being submersed under water
1 meter for up to 30 minutes.
Note: In case of swimming in the sea or in a saltwater pool,
it is recommended to rinse the watch with fresh water after
immersion due to the corrosive effect of salt water.
2. Initial setup
2.1 Download the app
The Olympo smartwatch compatible app is called Smart-
Time Pro. There are several ways to download it:
- Tap here to download the Smart-Time Pro app from Google
Play or App store.