EGO PRO X LMX5300SP Manual página 14

EN
TROUBLESHOOTING
PROBLEM
The mower or self–propel
function fails to start.
The mower cuts unevenly.
The mower does not
mulch properly.
14
56 VOLT LITHIUM-ION CORDLESS MOWER — LMX5300SP
CAUSE
◾
The battery pack(s) charge is depleted.
◾
The battery pack(s) is not properly inserted
into the battery compartment.
◾
The handle is not locked in an operating
position and the mower status indicator
flashes green.
◾
The mower deck is clogged with grass and
debris.
◾
The blade is dull.
◾
The grass-cutting height is not set properly.
◾
The blade is installed incorrectly.
◾
The blade speed mode is not set properly.
◾
Wet grass clippings are sticking to the
underside of the deck.
◾
The mower is set to cut too much grass at
once.
◾
The blade speed mode is not set properly.
SOLUTION
◾
Charge the battery pack.
◾
Insert the battery pack(s) into
battery compartment until you
hear a "click".
◾
Stop the mower and make sure
that the handle is locked in one
of the operating positions.
◾
Clean the mower deck and
ensure that the blade has
freedom of movement
◾
Sharpen or replace the blade.
◾
Move the deck height to a higher
setting.
◾
Re-install the blade, following
the section "REPLACING THE
BLADE" in this manual.
◾
Select a proper blade speed
mode.
◾
Wait until the grass dries before
mowing.
◾
Raise the deck to a higher cutting-
height setting.
◾
Select a mode 1 or ECO blade
speed mode.