Ego Power+ HPW2000E Manual página 13

CLEANING THE NOZZLES (Fig. O)
When the holes of the nozzles are blocked, you may use
the provided nozzle cleaning needle to pass through the
holes and remove blockage.
TRANSPORTING THE PRESSURE WASHER (Fig. P)
Press the handle lock button, and then pull out the
telescopic handle to the first length level until you hear a
"click". If desired, you may press the handle lock button,
and then pull the telescopic handle out to the second
length level.
STORING THE PRESSURE WASHER
1. Stop the pressure washer, release pressure, empty
water, and remove the battery pack from the
pressure washer following the instructions in the
section "To Stop the Pressure Washer".
2. Store nozzles in the nozzle storage area of the
pressure washer (Fig. Q1).
3. Roll up the high-pressure hose and store it behind
the telescopic handle (Fig. Q2).
4. Store the gun and lance and wand assembly into the
holder brackets or disconnect the gun and store it in
the upper holder brackets (Fig. Q3).
5. Clean the pressure washer thoroughly before storing
it.
6. Store the pressure washer in a dry, well-ventilated
area, locked-up or up high, out of the reach of
children. Do not store the pressure washer on or
adjacent to fertilizers, gasoline, or other chemicals.
Protecting the environment
56V LITHIUM-ION PRESSURE WASHER — HPW2000E
Do not dispose of electrical equipment,
used battery and charger into household
waste! Take this product to an authorized
recycler and make it available for separate
collection. Electric tools must be returned
to an environmentally compatible recycling
facility.
EN
13