Ego Power+ HPW2000E Manual página 9

Guaranteed sound power level L
(measured according to 2000/14/EC)
Vibration a
h
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
RECOMMENDED ACCESSORIES
WARNING:
Use only accessories listed below. Use
of accessories that do not meet the original equipment
specifications may lead to improper performance and
compromised safety.
PART NAME MODEL NUMBER
Premium Foam Cannon AFC2000E
Turbo nozzle ANZ2000E-T
15° nozzle ANZ2015E
25° nozzle ANZ2025E
40° nozzle ANZ2040E
Rinse nozzle ANZ2000E-R
PACKING LIST (FIG. A1)
DESCRIPTION
KNOW YOUR PRESSURE WASHER (Fig. A1)
1. Telescopic Handle
2. Handle Lock Button
3. Upper Holder Bracket
4. Wheel (x2)
5. Lower Holder Bracket
6. Water Inlet Port
7. Water Outlet Port
8. Speed Button
9. Speed Indicator
10. Power Button
11. Battery Pack Compartment
12. Nozzles Storage
13. Battery Pack Compartment Cover
86 dB(A)
14. Electric Contacts
WA
15. Ejection Mechanism
3.6 m/s
2
16. Battery-Release Button
K=0.9 m/s
2
17. Hose Holder Strap
18. Stainless Steel Wand
19. Quick Connect Lance
20. High-pressure Hose
21. Siphon Hose
22. Quick-Coupler Set (x2)
23. Foam Cannon
24. Filter
25. Nozzle Cleaning Needle
26. Rinse Nozzle
27. 40° Nozzle
28. 25° Nozzle
29. 15° Nozzle
30. TURBO Nozzle
31. Short Pressure Gun
32. Battery Cover
33. 5-LED Fuel Gauge
34. Speed Indicator
35. Speed Button
36. Gun Handle
37. Trigger
38. Lock-off Button
ASSEMBLY
INSTALLING THE HOLDER BRACKET ASSEMBLY
(Fig. B)
B-1 Upper Holder Bracket
B-3 Screws
CONNECTING THE HIGH-PRESSURE HOSE
(Fig. C – Fig. D)
You may connect the high-pressure hose by one of the
following ways:
◾
◾
NOTE:
the water outlet port, high-pressure hose, gun at the
factory.
56V LITHIUM-ION PRESSURE WASHER — HPW2000E
B-2 Lower Holder Bracket
Connect the high-pressure hose to the water outlet
port and the gun directly using threaded connectors
(Fig. C1 – Fig. C2);
Connect the high-pressure hose to the water outlet
port and the gun using two quick-coupler sets to
achieve easy installation/removal (Fig. D1 – Fig. D2).
The quick-coupler sets have been installed onto
EN
9