Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation
1. Unpack the device and install the
accessories.
Illustration B
Initial startup
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the flat fold filter or can-
dle filter when vacuuming.
Anti-static system
Static charges are discharged through
the earthed connection nozzles. This
prevents sparking and electric shocks
with electrically conducting accesso-
ries (optional).
Dry vacuuming
● When vacuuming fine dust, a fleece
filter or dust bag can also be used.
Installing the candle filter
1. Open the filter cover.
2. Remove the filter frame (with flat fold
filter).
Illustration C
3. Insert the candle filter.
Illustration D
4. Close the filter cover until it audibly
latches into place.
Installing the fleece filter bag
1. Unlock and remove the suction
head.
2. Fit the fleece filter bag.
Illustration E
3. Fit and lock the suction head.
10
Installing the dust bag
Note
The dust bag opening must be pulled
fully over the suction hose port.
1. Unlock and remove the suction
head.
2. Fit the dust bag.
Illustration F
3. Pull the dust bag over the container.
4. Fit and lock the suction head.
Wet vacuum cleaning
Note
The candle filter included in the scope
of delivery with the order number
AS3624140050 is not suitable for wet
vacuum cleaning.
Installing the squeegees
1. Remove the brush strip.
Illustration G
2. Install the squeegees.
Note
The structured side of the squeegees
must face outwards.
Removing the fleece filter bag
● The fleece filter bag must always be
removed when vacuuming wet sub-
stances.
1. Unlock and remove the suction
head.
2. Pull the fleece filter bag out to the
rear.
Illustration H
3. Fold in the lock latch and seal the
fleece filter bag tight.
4. Fit and lock the suction head.
Removing the dust bag
● The dust bag must always be re-
moved when vacuuming wet sub-
stances.
1. Unlock and remove the suction
head.
English
Publicidad
