Publicidad
Idiomas disponibles
Idiomas disponibles
Note
See the Technical data for the permis-
sible power rating of the power tool.
3. Remove the angle piece from the
suction hose.
Illustration L
4. Install the tool adapter on the suc-
tion hose.
5. Connect the tool adapter to the pow-
er tool.
Illustration M
Automatic filter dedusting
The device is equipped with a special
filter dedusting function, which is par-
ticularly effective against fine dust. The
flat fold filter or candle filter is automat-
ically cleaned every 15 seconds (AU-
TO MAX) or every 60 seconds (AUTO
MIN) by a blast of air (pulsing noise).
1. Set the turn switch to the desired
program (AUTO MIN-AUTO MAX).
2. Power dedusting (for particularly se-
vere contamination of the flat fold fil-
ter or candle filter): Set the turn
switch to program 2, seal the suction
pipe or bender with your hand and
wait for the automatic filter cleaning
to finish (lasts 15 seconds).
Illustration N
Switching off the device
1. Switch off the device at the turn
switch.
2. Pull out the mains plug.
Each time after use
1. Empty the container.
2. Vacuum off the inside and outside of
the device and clean with a moist
cloth.
Folding the push handle in/out
1. Release the push handle lock and
adjust the push handle.
12
Storing the device
1. Store the suction hose and mains
cable as shown in the illustration.
Illustration O
2. Store the device in a dry room and
secure it against unauthorised use.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Remove the suction hose with floor
nozzle from the support. Carry the
device by the carrying handle and
the suction pipe, not by the push
handle.
2. When transporting the device in ve-
hicles, secure it to prevent it from
slipping or overturning in accord-
ance with the respective valid guide-
lines.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
The device may only be operated in-
doors.
Care and service
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Replacing the flat fold filter
1. Open the filter cover.
2. Remove the filter frame.
Illustration C
3. Remove the flat fold filter.
English
Transport
Storage
Publicidad
