Flama 5501FL Manual De Instrucciones página 21

DESCRIPTION
1. Generator base
2. Water tank with handle
3. Thermal insulation support
4. Storage and transport lock
5. Iron
6. Temperature button
7. Steam button
8. Continuous steam button
9. Temperature indicator
10. Base of the iron
11. Cable organizer
12. Anti-limestone filter
GENERAL INFORMATION
WARNING
During or after ironing, never rest the hot
base of the iron anywhere besides the
thermal insulation support.
Temperature button
Rotate the temperature button to set
the ironing temperature according to the
fabrics to be ironed.
Min - Minimum temperature position. In
this position steam ironing may not be
used.
• - Indicated for synthetic fibers and silks.
In this position steam ironing may not be
used.
•• – Indicated for wool. In this position
steam ironing may not be used.
••• - Indicated for cotton and linen.
Max - Maximum temperature position.
Steam button
When the appliance has heated to the
temperature selected and the temperature
indicator goes off, press the steam button
Release the steam button to dry iron,
without steam.
Continuous steam button
Move the continuous steam button forward
for continuous steam output without
having to press the steam button.
To stop continuous steam delivery, move
the Continuous Steam Knob backwards.
Temperature indicator
When you plug in the appliance, the
temperature indicator lights up. As soon as
the iron reaches the selected temperature,
it will turn itself off. The temperature
indicator will go off and on while the
appliance is in use, to indicate that it is
operating correctly.
Water tank
Before filling the tank with water, make
sure that the appliance is unplugged.
NOTE: We recommend that you use tap
water instead of demineralized water,
which can affect the generator's internal
sensors and prevent the pump from
working properly.
WARNING! Do NOT fill the water tank with
hot water.
WARNING! Never add descaling, aromatic,
alcoholic or detergent products, which may
damage the device or make it unsafe to use.
English
19