Time Setting - Astralpool PRO-ELYO INVERTER 13 Manual Del Usuario

Press for 5s to change the " Heat MODE" or " Cool MODE" .
( Notice : this operation is unavailable for the heating only machine)
6.2.3 and
Water temperature setting :
Press and
Parameter checking :
Press first, then press
TIME checking :
Press first, then press
start time " press

TIME setting

Press first ,then press the
to enter into "HOUR" setting. The "Hour " flashes, and press the
to save the "Hour". Then the "
press the to save the current time setting , or press
ATTENTION:
If the current time is in the range of time OFF, the machine will be turn OFF automatically after setting the
time of automatic start and the time of automatic stop. Whereas the machine will operate normally.
Timer On setting:
Press first ,then press the
to enter into "HOUR" setting. The "Hour " flashes, and press the
button
to set the water temperature directly.
to check the " User parameter from d1 to d9.
to check "current time",
once again to check " Automatic stop time " .
to enter into "Current time " displaying . Then press
Minute" flashes, and press the
twice to enter into 'Timer on' interface. Then press
press
or
or
for quick-exit and saving.
or
15
again to check the "Automatic
once again
to set the hour ,then press
to set the "Minute" and finally
once again
to set the hour ,then press