Astralpool PRO-ELYO INVERTER 13 Manual Del Usuario página 21

Press and in 10s, the system will reset and display "0000" on the controller.
6.2.5
Symbol of heating, the light will be on when it is in operation.
When defrosting, the light will flash.
6.2.6
Symbol of cooling, the light will be on when it is in operation.
6.2.7
Symbol of automatic stop, the light will be on when it is in operation.
6.2.8
Symbol of automatic start, the light will be on when it is in operation.
6.2.9
the heat pump will operate in Powerful only.
Press this button, the light will be on, .
6.2.10
While you choose the Smart, the heat pump will just operate in Smart and Powerful.
6.2.11
While you choose the Silent , the heat pump will just operate in Silent and Smart.
Silent, Smart and Powerful Smart
The operating logistic of shift between : the default setting in factory is in
operating mode
.
The operating logic
6.3
NOTED :
setT = Setting water temperature
setT-1 = less 1℃ than Setting temperature
setT+1= more 1℃ than Setting temperature
17