Astralpool PRO-ELYO INVERTER 13 Manual Del Usuario página 6

1. Description
2. Specification
3. Adjust by-pass kit
4. Location and connection
5. Electrical Wiring
6. Start-up of the Heat Pump
7. Parameters
8. Troubleshooting
9. Exploded Diagram and Maintenance
10. WARRANTY
Thank you for using PRO-ELYO Inverter swimming pool heat pump for your pool heating, it will heat your
pool water and keep the constant temperature when the air ambient temperature is at -10 to 40℃
ATTENTION: This manual includes all the necessary information with the use
and the installation of your heat pump.
* The installer must read the manual and attentively follow the instructions in implementation and
* The installer is responsible for the installation of the product and should follow all the
instructions of the manufacturer and the regulations in application. Incorrect installation against
* The manufacturer declines any responsibility for the damage caused with the people, objects and
of the errors due to the installation that disobey the manual guideline. Any use that is without
conformity at the origin of its manufacturing will be regarded as dangerous.
WARNING:
*Please always empty the water in heat pump during winter time or when the ambient temperature drops
below 0℃, or else the Titanium exchanger will be damaged because of being frozen, in such case, your
warranty will be lost.
*Please always cut the power supply if you want to open the cabinet to reach inside the heat pump,
because there is high voltage electricity inside.
*Please well keep the display controller in a dry area, or well close the insulation cover to protect the
display controller from being damaged by humidity.
maintenance.
the manual implies the exclusion of the entire guarantee.
INDEX INDEX INDEX
p.3-4
p.5
p.6
p.7-10
p.11-13
p.14-19
p.20-21
p.22-24
p.25-31
p.32-33
2