Publicidad
Idiomas disponibles
Idiomas disponibles
Always operate the vacuum with a genuine Panasonic Type U3 Standard or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through.any
authorized Panasonic dealer. An optional cloth bag is available.
1. Press the release
button located on the
top of the bag cover.
Pull the bag cover
forward. Remove
and lay aside.
Release
Button
-
3. Spread out the end
of the new dust bag.
NOTE: Pull carefully so
as not to tear the bag at
the folds.
5. Reinsert the tab
provided on the
end of the dust
cover into
the groove
Body_
on the dust
Positioning
1
compart-
^
ment to
„
^
allow the
p^ftiorting Tab
cover to
rotate closed.
'NOTE: The dust cover must be
completely and correctly installed
for proper operation.
2. To remove the dust
bag, grasp the cardboard
portion of the dust bag and
pull it out.
Dust
4. Attach the new dust bag onto
the bag holder by holding the
cardboard portion and push¬
ing back as iilustrated.
/
Dost
6. Rotate
the dust
cover up into
^
the closed
\
position and
press into place.
NOTE: The dust bag
should not be caught
between the
lower edge of
^
the dust cover
K
and the gasket
y
as indicated by
the arrow in the
illustration.
Publicidad
