CAUTION
DO NOT get the power cord caught under the nozzle when using the vacuum or
attachments as it can be damaged by the agitator as it revolves.
ATTACHMENTS
Suction Control Slide
»
Telescoping
Wand
Dusting
Brush —
Upholstery Tool
Crevice
Tool
Raised
^ Tab
^
IBD
Slot
Hose
'/trilby
The attachments should be conveniently positioned on the
back of the cleaner for easy access. Some of the attachments
may already be assembled. Assemble the hose and attach¬
ments to the cleaner as follows:
.Insert the crevice tool, cleaning end down, into the end of the
telescoping wand nearest the locking ring. A slight twist of the
crevice tool will lock it into place.
Place the telescoping wand on the back of the cleaner with
the locking ring and the crevice tool up, and the bot¬
tom resting on the ledge near the rear wheel.
Crevice
Insert the hose into the back of the vacuum
cleaner as shown here in the illustration.
To attach the wand to the hose for use, align the
two (2) raised tabs on the wand with the "J" slots
in the hose. After guiding the tabs along the
grooves, twist to lock in place.
Tefescop/ng
Wand
-
Dusting
Brush
—
Upholstery
Tool
-