Publicidad
Idiomas disponibles
Idiomas disponibles
TO ASSEMBLE CLEANER
WARNING
Electrical Shock Hazard.
DO NOT plug into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has
been installed for shipping
Handle
purposes. Please remove
the screw before inserting the han¬
dle. Insert the han¬
dle as shown in the
Opening for ^
illustration. Ensure
Handle
—
that the cord hook
Handle
//
is on the back side
screw -t/—p
of the handle
before inserting.
//
Lj
3. There is a recessed area
between the cord hook base and
the handle that is designed to
secure the power cord during vacu
uming.
Always push the power cord down
into this recessed area to help
keep the power cord from hanging
near the nozzle and being dam¬
aged by the agitator.
2.
Insert the
screw that you
have removed.
Be sure the
screw is tight¬
ened, but not
overtight¬
ened.
4. Loosely wrap the power
cord around cord hook.
Secure the plug head to the
cord by pushing the power
cord into the retainer on
the plug head. Place
the cord wrap around
^
the bottom loop of
//A
the cord.
I h
Publicidad
