Publicidad
Idiomas disponibles
Idiomas disponibles
5. Manual defrost
6. Overheating
7. Humidity boost
8. Energy saving
Press the
confirm. Press
follow the steps you used to turn it on. To exit, press the
through the menus until the unit's temperature and humidity are displayed.
10.4.2.5 Defrosting
For models DAV-200 and DAV-400:
This unit carries out defrost cycles automatically as needed, but you can perform one
manually by pressing the
the settings for this function allow it).
For models DAV-400 and DAV-750:
This unit carries out defrost cycles automatically as needed, but you can perform one
manually by following the steps explained above.
10.4.3 Maintenance
These guidelines will help you and your service partner ensure that the cabinet
continues providing the best possible service throughout its useful life.
The following instructions discuss what cleaning you can do. They also describe how to
troubleshoot any problems quickly before calling customer service. We hope you find
them helpful.
10.4.3.1 Cleaning by the user
Before carrying out any cleaning operation, press the thermostat button
ensure that the unit is OFF. Then, unplug the appliance from the mains supply. The
following instructions assume that the appliance is unplugged.
WARNING
injury.
Never allow cleaning water to get into any electrical components or the ventilation
grille.
Be careful not to damage or dislodge the data plate inside the appliance. It is
important for our customer service.
10.4.3.2 Air renewal through the activated carbon filter
Change the carbon filter once a year to maintain full efficiency.
buttons to select any of the functions, then the
again to enable the function. To turn the function off again,
button. The unit then defrosts manually (providing
: Do not use steam cleaners! They can cause breakdowns and
button to
button to go back
and
32
Publicidad
