Descargar Imprimir esta página

UFESA QuickSlicer Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or in-
dustrial use under any circumstances. Any incorrect use or improper handling of the pro-
duct shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one in-
dicated on the product label. The mains connection cable must not be tangled or wrapped
around the product during use. Do not use the device, or connect and disconnect to the
supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle
Unplug the product immediately from the mains in the event of any breakdown or damage
and contact an official technical support service. In order to prevent any risk of danger, do
not open the device. Only qualified technical personnel from the brand´s Official technical
support service may carry out repairs or procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
This food processor is excellent to chop, mix, slice, or shred most foods. However, to main-
tain peak performance, do not use your food processor for the following: grinding grain,
coffee beans or spices; slicing frozen meat; or crushing ice.
Operating time will depend on the quantity of food being processed. Most foods can be
sliced, chopped or shredded in just seconds. If the unit is operated continuously for 30
seconds, let the processor rest about 3 minutes before continuing.
PRIOR TO USE
How to lock the bowl (Fig. 1)
1. Align the mark shown at the bottom of the bowl to the open padlock icon shown on the
base .
2. Turn the bowl clockwise until the mark will be aligned with the closed padlock.
NOTE: The food processor will not work unless the bowl is correctly locked into position.
How to assemble and lock the lid (Fig. 2)
1. Align the mark shown at the top of the bowl to the open padlock icon shown on the lid.
2. Turn the lid clockwise until the mark will be aligned with the closed padlock.
NOTE: The food processor will not work unless the lid is correctly locked into position.
Control switch (Fig. 3)
Rotate the knob clockwise to select the desired speed: Low (I) / High (II)
The food processor will work continuously. For an interval on and off working, use the
PULSE (P) button by rotating the knob counterclockwise.
19

Publicidad

loading