Brewing Coffee Later - Oster BVSTDCEJX36 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1
. You must first set the time for when you would like the coffee
maker to begin brewing your coffee as described in "Setting
the Clock and the Delay Brew Timer" section.
2. Prepare your coffee maker as described in the "Adding Water
and Ground Coffee" section.
3. To activate the delay brew function and program your coffee
maker to brew coffee at a later time, press the delay brew
"Colado Prog." button twice (Figure 8). The delay brew "Colado
Prog." light will illuminate. The coffee maker is now set to automatically brew
coffee at the pre-set time. At this time the brew strength light will turn on. You
can select the strength that you desire by pressing the brew strength "Intensidad"
button. (Amber for strong "Fuerte", white for regular "Regular")
4. At the pre-set time, the brew now "Colar Ahora" light will turn on and the delay
brew "Colado Prog." light will turn off, indicating the brewing has started in the
selected brew strength. The fresh brew timer feature will start.
5. The coffee maker warming plate will keep your coffee hot for 2 hours and then
automatically turn off.
NOTE: Scalding may occur if the lid is open during brewing cycle.
As a safety feature, your coffee maker will NOT start again automatically the next
day. If you want your coffee to brew at the same time the following day, simply
add a new filter, coffee and water and set delay brew, by repeating Steps 2 and 3
above.
To cancel delay brew:
Press the delay brew "Colado Prog." button until all lights turn off. (Figure 8).

BREWING COFFEE LATER

E n g li s h - 8
figure 8

Publicidad

Tabla de contenido
loading

Tabla de contenido