Oase SwimSkim 50 Instrucciones De Uso página 19

Cleaning/replacing the impeller unit
Take the pump out of the pump chamber.
 Disassemble the pump as shown in the figure.
– During cleaning the air hose remains in the intake socket.
 Clean all parts with a soft brush and clear water. If applicable, clean the foam filter with clear
water.
 If the impeller unit is damaged or worn, replace it.
 Reassemble the pump and the SwimSkim in reverse order.

During reassembly, check the position of the air hose in the intake socket.
 Ensure that the air hose is inserted up to the mark so that the water aeration works cor-
rectly.
Storage/winter protection
The unit is not frost-proof and has to be removed and put into storage if minus temperatures
are expected.
How to correctly store the unit:
 Thoroughly clean the unit.
 Check the unit for damage and replace damaged components.
 Store the pump submerged and in a frost-free environment.
 Protect electrical connections from moisture and dirt.
EN
SSM0017
19