Publicidad
Idiomas disponibles
Idiomas disponibles
may damage the machine.
- If the machine is not in STANDBY mode,
turn it on using the ON/OFF button.
- Place a sufficiently large recipient under
the coffee spout.
- Simultaneously press and hold the ON/
OFF button and the espresso coffee button
for 5 seconds. You will hear a beep; the
espresso coffee button and the descaling
indicator symbol will flash.
- Press the espresso coffee button to
confirm the start of the cleaning process.
- The descaling indicator symbol will
continue flashing, indicating that the
appliance is performing the automatic
cleaning process.
Attention: keep your body/skin away from
the hot water.
- When all the water in the tank has been
used, the low water level indicator symbol
and the espresso coffee button will flash.
- Carefully discard any remaining solution
from the water tank, wash it and fill it with
clean water until the MAX fill line. After
the water tank is filled and returned to
place, the low water level indicator symbol
will turn off. The low water level indicator
symbol and the espresso coffee button will
stop flashing.
The machine will continue with the
descaling process; it will first use half of
the water in the tank, then, after a pause of
around 1 minute, the process will continue
until the rest of the water from the tank has
been used.
- When the automatic cleaning process has
finished, the appliance will automatically
shut off.
Note: to make sure that the descaling
process is complete, be patient during the
36
process and check that the appliance turns
off automatically.
Cleaning the ground coffee outlet
After prolonged periods of use, some
ground coffee may accumulate in the
passage from the grinding compartment
to the brewing group. We suggest cleaning
the outlet of this passage to ensure that the
ground coffee reaches the machine.
- Push the service door from the bottom.
- Remove the service door.
- Press the (orange) buttons to eject the
brewing group.
- Remove the brewing group.
- Use the cleaning brush to clean the grinder
compartment outlet.
Cleaning the appliance
Unplug the appliance from the wall outlet.
Empty the internal drip tray and the coffee
grounds container.
Use a damp cloth or non-abrasive cleaning
agent to clean the water stains from the
appliance.
IMPORTANT: Never use abrasive cleaning
agents, vinegar or descaling solutions not
included in the appliance's cleaning kit.
VACUUM SYSTEM FUNCTION
We recommend using the vacuum system
function before long periods of not using
the appliance to protect against low
temperatures, as well as before contacting
technical assistance services.
- In STANDBY mode, simultaneously press
the ON/OFF button and the espresso button
for 5 seconds; there will be an alert sound
www.flama.pt
Publicidad
