Problem
When removing the water
tank, the water level is very
low, but the alert indicator
did not activate.
The external drip tray
collects too much water.
The coffee comes out too
slowly or drop by drop.
The low coffee bean level
indicator light turns on, but
there are coffee beans in
the coffee bean container.
The internal drip tray and
coffee grounds container
cannot
be
placed
position. The machine does
not work (control panel is
deactivated).
38
Cause
The area surrounding the
water tank connections is
damp.
The coffee grind was too
fine and blocked the water
outlet.
The internal coffee grounds
outlet is blocked.
The
internal
in
and the coffee grounds
container were removed
during the brewing process.
www.flama.pt
Solution
Clean the water
surrounding the water tank
connections.
Adjust to a coarser grind
while the grinder is
operating.
Follow the steps in the
"CLEANING THE GROUND
COFFEE OUTLET" section.
Place the internal drip tray
and the coffee grounds
container in the machine
so that it can detect them
drip
tray
and continue with the
interrupted cycle.
Afterwards, remove and
correctly
internal drip tray and coffee
grounds
position.
replace
the
container
into