Publicidad
Idiomas disponibles
Idiomas disponibles
and the vacuum system symbol will flash.
- Remove the water tank from the machine. The vacuum system symbol will stop flashing,
indicating that the vacuum system process is underway.
When the vacuum system function is finished, the machine will automatically shut off.
- Press the ON/OFF button before removing the water tank to return to STANDBY mode.
IMPORTANT: after running the vacuum system function, before using the machine again,
turn it on and press the hot water button until water exits the coffee spout.
TROUBLESHOOTING
Problem
The appliance does not
work.
Buttons on the control
panel are non-responsive
or require multiple presses.
The coffee is not hot
enough.
No coffee comes out.
The first cup of coffee is not
good quality.
The coffee does not have
crema.
The touch buttons are not
sensitive.
The machine takes too long
to heat up.
Cause
The appliance is not
plugged into the wall
outlet.
The appliance is under
electromagnetic
interference. The control
panel is dirty.
The mugs have not been
pre-heated. The brewing
group is too cold.
The vacuum system
function was previously
used.
The first grind of the
grinder may not deliver
enough coffee to the
brewing group.
The coffee beans are not
fresh.
You did not press the touch
button in the most central
area.
Scale has built up.
English
Solution
Plug in the power cord and
press the ON/OFF button.
Check the power cord and
plug.
Unplug the appliance, wait
2 minutes and plug it back
in.
Clean the control panel
with the provided cloth.
Heat the mugs. Perform
manual cleaning of the
appliance at least 2 times
before preparing the
coffee.
Press the hot water button
until water comes out of
the coffee spout.
Discard the coffee. The
next coffees will be of good
quality.
Substitute or use a suitable
brand of coffee beans.
Press the button in the
most central area.
Descale the machine.
37
Publicidad
