EINHELL GE-DP 6935 A ECO Manual De Instrucciones Original página 20

instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Dirty water pump
•
Universal hose connection
•
Original operating instructions
•
Non-return valve
3. Proper use
The equipment you have purchased is designed
to pump water with a maximum temperature of
35 °C. This equipment must never be used for
other liquids, especially not for engine fuels,
cleaning agents and other chemically-based
products!
Before you use the pump, clarify any possible
special conditions which need to be fulfi lled for
the installation!
For example, additional safety measures may be
needed if damage to property could result from a
power failure, soiling or a defective gasket.
Examples of such safety measures:
Pumps running in parallel on a separately protec-
ted power circuit, moisture sensors for switching
off the pumps, and similar safety arrangements.
Be sure to consult a professional plumber if you
have any doubt.
The equipment can be used wherever you want to
move water, e.g. in the house, in the garden, and
for many other applications. It must not be used to
operate swimming pools!
Please note:
As a rule, rain water and snow water have a low
level of conductivity.
Consequently you should not use the pump un-
supervised in pure rain water or snow water be-
cause of the risk of sensor malfunctions.
Anl_GE-DP_6935_A ECO_7935_N-A_ECO_SPK9.indb 20 Anl_GE-DP_6935_A ECO_7935_N-A_ECO_SPK9.indb 20
GB
If you want to use the equipment in bodies of wa-
ter with a natural, muddy bottom, place the equip-
ment in a slightly elevated position, e.g. on bricks.
The equipment is not designed for continuous
operation, e.g. as a circulating pump in a pond. In
this case the equipment's anticipated life will be
greatly shortened because the equipment was
not designed for continuous loading.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The water may be contaminated by escaping lub-
ricating oil/lubricant.
4. Technical data
GE-DP 6935 A ECO
Mains connection ......................... 230 V ~ 50 Hz
Power consumption .................................. 690 W
Max. pumping rate ................................17500 l/h
Max. delivery head ........................................ 9 m
Max. immersion depth ................................... 7 m
Max. water temperature .............................. 35°C
Hose connection: .. approx. 47.8 mm (G 1½ ) AG
Max. size of foreign bodies: ...................Ø 35 mm
Suction height: .................................. min. 40 mm
Protection .....................................................IPX8
GE-DP 7935 N-A ECO
Mains connection ......................... 230 V ~ 50 Hz
Power consumption .................................. 790 W
Max. pumping rate ................................19000 l/h
Max. delivery head ........................................ 9 m
Max. immersion depth ................................... 7 m
Max. water temperature .............................. 35°C
Hose connection: .. approx. 47.8 mm (G 1½ ) AG
Max. size of foreign bodies: ...................Ø 35 mm
Suction height: .................................. min. 40 mm
Protection .....................................................IPX8
- 20 -
14.02.2024 09:22:50 14.02.2024 09:22:50