Lincoln Electric GRAPHICS MAY VARY Manual Del Operador página 10

PROBLEM
Difficult to see through
filter.
Filter does not darken
when arc is struck.
ADF is cracked.
Weld spatter is
damaging the fil-
ter.
POSSIBLE CAUSE
Front cover lens dirty.
Cartridge dirty.
Front cover lens dirty.
Front cover lens is
damaged.
Sensors are blocked or
Solar panel is blocked.
WARNING
Cease (STOP) using this product if this problem
exists. UV/IR protection may be compromised re-
sulting in burns to the eyes and skin.
Missing, damaged,
broken, cracked or
distorted front cover
lens
SOLUTION
Clean or replace front cover lens.
Clean the Auto-Darkening
cartridge with soapy water
solution and soft cloth.
Clean or replace front cover lens.
Check for cracked or pitted front
cover lens and replace as
required.
Make sure you are not blocking
the sensors or solar panels with
your arm or other obstacle while
welding. Adjust your position so
that the sensors can see the weld
arc.
Replace front cover lens
as needed.