Publicidad
Idiomas disponibles
Idiomas disponibles
EN
In order to install the MSW-GDOOR-005B main machines firmly, it is recommended to use the
expansion screws to fix the mounting brackets.
8.2 accessory installation
A) Before installing the main machines, please install the wall bracket on the wall first, then fix the
connecting bracket, finally install the front mounting bracket on the gate.
Figure 4
Note: Please measure by gradient before fixing to ensure that the front mounting bracket and the
connecting bracket are in the same level.
Connect the connecting bracket and two wall brackets, please refer to Figure 5.
Publicidad
