MSW Motor Technics MSW-GDOOR-005B Manual De Instrucciones página 56

9.6 Adding remote control & delete remote control
9.6.1 Adding remote control
Press and hold "-" button, the alarm light will keep flashing, and digital screen displays remote control
mode -- "PO" -- two swing gates single channel mode; "Pd" -- single gate four channel mode; Press the
button of the remote control to be added, the digital screen will show the number of current saved
remote control, then the remote control learning is completed. (The default of new paired remote
control is two swing gates single channel mode).
9.6.2 Delete remote control
Enter into "AE" in the digital screen and then to choose "rE" to delete the remote controls.
Single Channel Remote
1 - Open/Close/Stop
2 - Open
3 - Stop
4 - Close
5 - Single Gate
9.6.3 Special remote control key-button
Press and hold the combination keys for 5S.
C(stop)+D(single gate) combination key -- enter into remote control learning.
EN
Four Channel Remote
Figure 16
(Pd mode)