Publicidad
Idiomas disponibles
Idiomas disponibles
14.2 Replacing the activated charcoal filter
Depending on the frequency of use of the extractor hood, replace the activated
charcoal filter every six months. The activated charcoal filter cannot be washed
or re-used.
In order to guarantee proper absorption of the odours, the volume of activated
charcoal must match the extraction capacity of the hood. The high quality of the
activated charcoal guarantees efficient absorption of the kitchen odours with
normal operation. Therefore use only original filters and replace at regular
intervals.
•
Disconnect the appliance from the mains power supply.
•
Open the extractor hood by pressing the lock on the metal filter cassette.
•
Carefully remove the metal filter cassette.
Figure 22 Replacing the activated charcoal filter
•
Unscrew the activated charcoal filter. Remove it and dispose of with
household waste.
•
Fit new activated charcoal filters on both sides of the motor. Press the
filters onto the plastic lugs and turn them clockwise until they click into
place.
Figure 23 Replacing the activated charcoal filter 2
•
Reinstall the metal filter in the reverse order.
•
Connect the appliance to the power supply again.
➢ Make sure that the filter is properly locked. Otherwise it could
become loose and damage could occur.
➢ The activated charcoal filter can be ordered from After Sales
Service.
Page | 32
EN
Publicidad
