BGS technic 1763 Manual De Instrucciones página 2

INTENDED USE
The fan hub wrench set is used to disassemble and assemble fan hubs or viscous couplings on
vehicles from various manufacturers such as Ford, BMW, Mercedes, etc.
ASSIGNMENT
1 For loosening the lock nuts on thermo-viscose fans such as on FORD, BMW and many other
vehicles.
2 For loosening the lock nuts on thermo-viscose fans such as on FORD, MERCEDES and many
other vehicles.
3 Allows the water pump pulley to be secured in place while the fan is loosened and removed.
4 Allows for loosening and removal of viscose fitting on radiator fans.
5 Needed to loosen and remove hubs from fans. The key is attached to the front of the hub.
6 Special open-end wrenches for installing and removing fans.
7 The 3-in-1 design enables three different repair jobs, all of which require a specific tool due to
their location in the vehicle.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Fan Hub Wrench Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1763
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed