LAVAZZA A MODO MIO MilkEasy Instrucciones De Uso página 21

PREPARATION OF THE MILK FROTHER
No liability is held for damage caused by:
• incorrect use not in accordance with
the intended purposes;
• repairs not carried out by authorized
service centres;
• tampering with the power supply cable;
• tampering with any parts of the appli-
ance;
• the use of non-original spare parts
and accessories;
• storage at temperatures below 4°C;
• use in places with temperature below
10°C or above 40°C;
• use in places with relative humidity
above 95%;
In these cases, the warranty is not valid.
Remove any packaging materials and check
that all components are present.
Before the appliance is used for the first
time, or after extended periods of non-use,
it should be thoroughly cleaned as described
in the section "MAINTENANCE AND
CLEANING".
This appliance can only be operated
with original accessories provided by
the manufacturer.
No liability will be assumed for any
damage caused by misuse of the milk
frother or non-compliance with the in-
structions contained in this manual.
STARTING THE MILK FROTHER
Position the appliance on a stable,
flat surface, away from water and heat
sources.
The milk frother base shall be only con-
nected to a grounded current outlet,
installed according to law regulations.
Make sure that the supply voltage cor-
responds with the voltage marked on
the rating label of the appliance.
This product complies with all binding
CE labelling directives.
The first time you use the milk frother,
remove all cardboard and plastic packag-
ing. Insert the milk frother on the power
base, make sure to position it correctly.
Connect the power cord of the base to
the current outlet.
When inserting the milk frother on the
power base, the appliance will sound a long
acoustic signal.
21
EN