EN
HEAT MILK
Proceed as shown in points and in
"HEAT AND FROTH
section
Pour milk into the milk frother in an
amount between the MIN level mark and
the MILK level mark.
Do not fill the milk frother beyond the
MILK level
(6.3 fl oz /180 ml
milk may come out.
For optimal warm milk foam, we recom-
mend using unskimmed milk (pasteurized
or UHT), refrigerated from 39.20°F to
46.40°F (4-8°C).
Do not use milk at room temperature
Put the cover on the milk frother.
Position the milk frother on the base.
Make sure the lower side of the milk
frother and the base are dry.
USE OF THE MILK FROTHER
MILK".
), otherwise
26
Press the multifunction button twice
quickly.
The lid must always be inserted during
operation.
2
CLICK
Press the multifunction button twice
quickly. The second click must be with-
in one second from the first one.
Do not remove the milk frother from
the base before completing the cycle.
The appliance emits a double beep.
The multifunction button comes on with
white light flashing slowly.
The appliance starts the preparation.
The heating process ends automatically
when the milk is sufficiently hot.
The appliance emits a double beep to in-
dicate the end of the heating process.
The multifunction button turns off.