Descargar Imprimir esta página

Philips 7000 Serie Manual De Instrucciones página 33

Ocultar thumbs Ver también para 7000 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 250
Problem
The Floor Type Recognition
is not reacting logically.
The appliance delivers static
shocks.
Wet cleaning
Problem
The water flow from the
water tank is reduced.
Too much water flows out of
the water tank at a too high
speed.
The floor dries with stripes.
Possible cause
The brush is clogged with hair
or dirt.
The appliance builds up static
electricity. The lower the air
humidity, the more state
electricity is build up.
The dust and dirt that is
vacuumed up is static.
Possible cause
The wetting strip is blocked by
dirt.
The microfiber mopping pad is
not placed correctly and blocks
the wetting strip as a result.
The water tank is empty or
nearly empty.
A microfiber mopping pad is
used that is not supplied by
Philips.
Lime scale has build up in the
wetting strip.
The water tank cap is not
attached properly.
The strip is not placed properly
in the bottom of the water
tank.
Too much liquid cleaner has
been added to the water.
Solution
Clean the brush with a pair of scissors or by
hand. See the instructions in the user
manual.
Discharge the appliance by frequently
holding the tube against other metal
objects in the room (for example the legs of
a table or chair, etc.). Or raise the air
humidity level in the room.
Empty the dust container and clean the
filter according to the instructions in the
user manual.
Solution
Remove the wetting strip and clean it. Place
the clean wetting strip back.
Make sure that you place the mopping pad
correctly. Check the user manual for proper
placement.
Refill the water tank.
Only use an original Philips microfiber
mopping pad. The mopping pads can be
bought in the online Philips shop at
www.philips.com/support or at your
Philips dealer.
Buy a new wetting strip in the online Philips
shop at www.philips.com/support or at
your Philips dealer.
Check the cap and make sure it is fully and
properly closed.
Check the strip and make sure that it is
fitted properly in the bottom plate of the
water tank.
Use only a few drops of liquid cleaner or
use a cleaner that foams less.
English
35

Publicidad

loading