Oase Neptun 1600 Instrucciones De Uso página 2

- English -
REMINDER
CALL 1-866-627-3435
BEFORE RETURNING TO STORE.
Description
Part
A Motor casing
B Pressure socket
C Flow regulator/ suction unit
D Pre-filter
E Pump foot
Information about these operating instructions
Welcome to OASE Living Water. You made a great choice with the purchase of this product Neptun 1600/2600. Prior
to operating the unit, please read the instructions of use carefully and fully familiarize yourself with the unit. Ensure that
all work on and with this unit is only carried out in accordance with these instructions. Please strictly follow the enclosed
instructions to ensure safe and correct handling of the product. Keep these instructions in a safe place. Please also hand
over the instructions when passing the unit on to a new owner.
WARNINGS AND CAUTIONS SYMBOLS
Symbols used in these instructions
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage.
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are
not taken.
Risk of personal injury caused by a general source of danger.
!
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are
not taken.
Important information for trouble-free operation.
2
B
A
D
E
- English -
Intended use
Neptun 1600/2600, referred to in the following as "unit", may only be used as specified in the following:
• For pumping clear water used for indoor and outdoor fountain pumps, table fountain pumps and statues.
• For operation with clean water.
• Operation under observance of the technical data.
The following restrictions apply to the unit:
• Do not use in swimming ponds.
• Never use the unit to convey fluids other than water.
• Never run the unit without water.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
• Do not connect to the domestic water supply.
Use other than that intended
This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance
with these instructions or modification(s) to the unit will void the limited warranty.
C
Installation
Important:
● The unit can be placed submerged or inline.
● Always place the unit below water level.
General preparatory work
1. Bolt on the suction unit and fit the pressure
socket.
2. Connect the desired hose for the water
feature to the pressure socket.
● Adapt stepped hose connectors to the
water supply and return in accordance
with the hose diameter.
3. Remove the pump foot, if necessary. For
this purpose, press the pump foot to the
rear, as illustrated.
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Prior to reaching into the water, disconnect the power supply to all units used in the water.
• Disconnect the power plug prior to carrying out work on the unit.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
3.
3