BaByliss PRO FLASHFX FX59Z Instrucciones De Operación página 6

Regular Zero Gap
REGULAR
ZERO GAP
ZERO GAP
Step 1.
Before placing the blade into the adjustment tool, use the
screwdriver provided to loosen the tension screws, without
removing them completely from the blade holder.
Step 2.
Place the blade into the adjustment tool in the side labelled
'Zero Gap'.
blade guide
Step 3.
Push the blade guide up as far as the adjustment tool
allows, so the moving blade sits closely with the top of the
adjustment tool. The blades will now be flush with each
other.
Step 4.
Using the screwdriver, tighten the tension screws to hold
the blade in place.