Publicidad
Idiomas disponibles
Idiomas disponibles
8. Place the door on the lower hinge. Make sure the
glass door is upright and closes easily.
9. Place the top hinge on the opposite side.
10. Place the door on the appliance, then loosely screw
the hinge without tightening completely.
11. Once the door is installed, adjust the hinge by
tightening the screws until the door is in the correct
place.
12. Replace the top hinge cover.
Note: The door seal may come out of its place when changing the door. If you notice gaps between
the seal and the appliance frame when the door is closed, pull carefully on the seal to close these
openings. The correct positioning of the seal is important to ensure the appliance is waterproof.
BEFORE USE
PRIOR TO FIRST USE
CAUTION:
After transport, the appliance should be left standing upright for 24 hours before connecting to the
power supply.
Nonobservance could lead to malfunction of the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory parts. Consider the instructions which we
provide in the chapter "Cleaning and Maintenance".
Leave the appliance open to eliminate residual odors.
RECOMMENDATIONS:
• Place the appliance in a cool place away from sunlight and heat sources.
• Certain parameters such as room temperature, door opening time or the number of bottles
stored inside could affect the internal temperature of your appliance. We recommend that you
check the internal temperature regularly and adjust it if necessary.
• Do not cover the vents.
OPERATING NOISE:
To reach the desired temperature, this appliance, like all wine fridges with compressor cooling
systems, can produce certain noises, which are normal operating noises.
45
Publicidad
