Publicidad
Idiomas disponibles
Idiomas disponibles
OPTIONS
Press and hold the Functions / Options Button
enter the Options menu. Press the Up/+
to scroll through the different options. Press the Laser / Power-ON
Button
to select. Press the Clear/Power-OFF Button
1
Reference: Change the reference point to the top surface, tripod mount
position, or bottom surface of the unit. NOTE: Remove unit from case
for tripod mounting or when referencing from bottom sruface.
Sound: Turn the sound on or off.
Memory: Press the Up/+
to scroll through the last 30 measurements.
Units: Select Feet + Inches (fractional),
Feet (decimal), Inches (fractional), or Meters.
Rounding: When Units are set to Feet + Inches,
select the fraction to which each measurement will
be rounded: 1/16", 1/8", 1/4", or 1/2".
FUNCTIONS: Press the Functions / Options Button
once to select a function, then press the Up/+
6
and Down/-
7
different functions. Press the Laser / Power-ON
Button
or the Functions / Options Button
1
to select. Press the Clear/Power OFF Button
go back.
Area (FIG. 1)
length, then the desired width. Perimeter
will be displayed on Line 3, Area will be
displayed on line 4.
Volume
(FIG. 2): Measure the desired
length, width, then height.
OPERATING INSTRUCTIONS
and Down/-
7
Buttons to scroll through the
8
: Measure the desired
for 1 second to
6
and Down/-
7
Buttons
8
a
6
to
5
c
a
Buttons
8
to go back:
5
FIG. 1
b
FIG. 2
b
9
Publicidad
