Publicidad
Idiomas disponibles
Idiomas disponibles
• Regularly inspect ports and charging cable for and debris, dirt,
damage, and corrosion.
• DO NOT attempt to repair device or cable; replace as needed.
• To protect the unit when not in use, store the unit inside the
provided hard case with the screen facing inward.
Be sure instrument is turned off and disconnected from all power
sources. Wipe with a clean, dry lint-free cloth. Do not use abrasive
cleaners or solvents.
Recharge as needed. There are no pre-designated intervals at which to
recharge as long as you are using the unit regularly. Avoid discharging
completely on a regular basis, as this can impact overall life.
If storing for more than one month, charge completely before
storage, and recharge approximately every three months to avoid full
discharge. Store in cool temperatures, mild humidity, and away from
direct sunlight (See GENERAL SPECIFICATIONS section).
Leaving in a vehicle or other confined spaces in extreme hot
temperatures can lead to decrease in service life, overheating, or fire.
Extreme cold temperatures below the specified storage range can
also harm performance and service life. Keep away from corrosive
chemicals and gases.
After taking out of storage, inspect visually to make sure device and
all accessories look satisfactory. Allow unit to return to ambient
conditions before recharging.
MAINTENANCE
CLEANING
RECHARGING
STORAGE
13
Publicidad
