Suncast BMADWR1 Instrucciones De Armado página 7

(H) x2
(G) x2
(G) x3
Align the slots on small drawer front ( R) with the tabs on small darwer ( S).
Slide down to engage until drawer front ( R) snaps into place.
Carefully, flip drawer assembly over and secure with 2 screws ( G) as shown.
Align the slots on large drawer front ( T) with the tabs on large
drawer (U).Slide down to engage until drawer front ( T) snaps
into place.
IMPORTANT: The large drawer front (T) must extend past
the drawer bottom. A rubber mallet may be useful.
Carefully, flip drawer over and secure with 3 screws ( G).
Insert drawer handle ( H) into large drawer front ( T) at an angle and press flat until handles snaps into place.
Repeat for remaining handle ( H)
with the small drawer front ( R).
7