Descargar Imprimir esta página

Lifetime UTILITY 60441U Instrucciones De Ensamblaje página 59

Publicidad

SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN)
TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS
4.1
• There are four heights from which to choose for the shelf. Choose the height for the shelf. Attach the shelf brackets (GNP) to
the left and right rear corner panels using two (2) screws (ADZ) each. The brackets must be at the same height. Do not overtighten.
The roof has been removed for clarity. In this example, we used the top screw holes.
• Il y a quatre heights to choose from for the shelf. Choisir la hauteur pour l'étagère. Bien attacher les équerres (GNP) aux
panneaux angulaires arrières gauche et droit à l'aide de deux (2) vis (ADZ) chacune. Les équerres devraient être à la même
hauteur. Ne pas trop serrer. Le toit à été rétiré par souci de clarté.
• Dispone de cuatro alturas entre las que uno puede elegir. Seleccionar entre las cuatro alturas. Fijar bien las escuadras
(GNP) a los paneles angulares traseros derecho e izquierdo usando dos (2) tornillos (ADZ) cada uno. Los estantes deberían
estar a la misma altura. No apretar demasiado. En aras de claridad, el tejado ha sido quitado.
GNP
ADZ (x4)
ADZ
ADZ
ADZ
ADZ
GNP
59
GNP

Publicidad

loading

Este manual también es adecuado para:

1713586