Publicidad
Idiomas disponibles
Idiomas disponibles
4. SETUP MENU
Keep the key pressed for 3s Mode to access the Menu
SETUP
4.1. SETUP
CONFIG
TYPE OF ENTRANCE
In the menu
TYP IN
, choose the entrance type
When there is only one entrance, choose the port where the signal is entering.
If it is multiple, select which ports is the signal entering.
DATE: With this menu the user can introduce the date in the system, with the format dd:mm:aa
TIME: With this menu the user can introduce the time in the system, using the format hh:mm:ss
LANGUAGE: With this menu the user can select the language
BRIGHTNESS: with this menu the user is introduced in the adjustment of the brightness of the display.
- Repeater 45: this allows the user to select the intensity of the display. It can be between 1 and 15, being 1 the minimum and 15 the
maximum.
- Repeater 100:
•
Manual:
it allows the user to select the intensity of the display manually.
•
Auto: the intensity is graduated automatically according to the environment light detected by the sensor.
CONFIG
PARAME
FABRIC
SERNUM
TYP IN
SINGLE
MULTI
DATE
TIME
LANG
BRIGHT
SINGLE
USER'S MANUAL GI400 R100 | GI400 R45
COM1
COM2
RS485
S12
S13
S23
S123
for only one entrance signal, or
MULTI
for multiple entrance signals.
EN
EN
17
Publicidad
