Marshall MG10 Guia De Inicio Rapido página 2

FRONT PANEL FUNCTIONS
1. INPUT
Jack input for your guitar. Use a good
quality guitar cable (i.e. one that's
screened/shielded) to help prevent
noise, interference and unwanted
feedback.
2. VOLUME - CLEAN CHANNEL
This control adjusts the volume of
the clean channel.
3. CHANNEL SWITCH
This switch allows you to change
between the amp's two channels,
clean and overdrive, via the front
panel. When the LED is green, the
Clean channel is engaged. When the
LED is red, the overdrive channel is
engaged.
EXPLORE
MARSHALL WORKSHOP
We've taken it back to basics and created the Marshall
Workshop videos to help you nail your sound. From
understanding your equipment to perfecting your
playing, the Marshall Workshop features all the tools
you need to craft that killer sound.
MARSHALL.COM/WORKSHOP
LIVE FOR MUSIC
Looking to take the plunge into the music industry?
Marshall Live For Music has lots of advice from industry
specialists and professional musicians to get your
career moving. From getting your first band together to
securing slots at festivals around the world, you can find
everything you need to make your mark in music.
MARSHALL.COM/LIVE-FOR-MUSIC
1 2 3 4
4. GAIN
This control sets the operating
level of the pre-amp. Simply turn up
the gain control until the required
amount of distortion is achieved.
5. VOLUME - OVERDRIVE CHANNEL
This control adjusts the volume of
the overdrive channel. The louder
this channel is set, the 'looser' the
amplifier will sound and feel.
6. CONTOUR
This highly effective tone control
works by modifying the mid-range
(body).
7. HEADPHONE OUT
For use when silent practice is the
MARSHALL.COM
5 6 7 8
order of the day. Connection of
headphones will automatically mute
the internal speaker.
8. MP3 IN
If you want to jam to your favourite
track, connect the line out or
headphone output of your player
here, adjust the volume of your
player to match that of your guitar
and you've got the perfect 'play-
along' practice system.
9. MAINS
The power switch turns your
amplifier on and off. The Channel
switch will light up when your
amplifier is turned on and will not be
lit when the amplifier is switched off.
ENGLISH
9