20.2 Rating plate
The rating plate with the connection and performance data can be founded beneath the
device.
21 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
WARNING
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.
21.1 Operation
With the Crema Glas you can heat cold as well as warm milk froth. The appliance has got
three markings for the filling:
► MAX-Marking: Fill in cold milk only up to the mark or hot milk or milk foam could
overflow.
► MIN-Marking: Fill at least 100 ml milk.
Warm milk froth
Put the whisk for frothing on the holder at the bottom of the jug and softly press the whisk
to fix it.
Select the button "hot" for hot. The button lights red. The device stops automatically when
the process is complete.
Heating milk
Put the whisk for heating on the holder at the bottom of the jug and softly press the whisk
to fix it.
Select the button "hot" for hot. The button lights red. The device stops automatically when
the process is complete.
Cold milk froth
Put the whisk for frothing on the holder at the bottom of the jug and softly press the whisk
to fix it.
Select the button "cold" for cold. The button lights blue. The device stops automatically
when the process is complete.
PLEASE NOTE
► Please pour out the milk and the milk froth. By using a metal spoon or another object
with sharp edges you risk damaging the jug.
► Only fill milk into the appliance.
Caso Crema Glas
28